User Manual
Version 1.0 12
IX.
Installation Instructions
9.1 Initial Setup
•
Leave a 30cm ventilation gap around all four sides of the cabinet.
•
Install the instrument only on a stable and level floor surface
•
When the freezer is located into the desired position, set the front castor brakes.
•
The freezer must NOT be moved with the product loaded inside.
Allow adequate space in the front of the freezer for door opening.
Remove all packing materials and the packing bag.
•
Install the stoppers at the rear side of the machine set as per figure below.
•
Do not install the instrument within small, closed or confirmed spaces.
Note:
If tipped more than 45°, allow the Freezer to sit upright for 24 hours prior to Start.
9.2 Powering On
•
Inspect all external components to confirm they are not damaged.
•
Check the rated voltage on the nameplate
•
With an empty cabinet, connect the power plug to a dedicated power socket.
•
After power
‘ON’, if an alarm sounds, press the ‘Buzzer Button’ to mute the alarm. The
alarm light continues to display until the temperature reaches the required setting data.
•
After checking the freezer is operating as required, gradually place items into the
cabinet.
