3
USER SERVICING INSTRUCTIONS
REPLACING FUSES FROM FUSE HOLDER
1) Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2) Open fuse cover. Slide open fuse access cover on top of
attachment plug toward blades.
3) Remove fuse carefully.
4) Risk of fire. Replace fuse only with 3 Amp, 125 volt fuse
(provided with product).
5) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6) Risk of fire. Do not replace attachment plug. Do not remove the safety device (fuse).
Discard product if the attachment plug is damaged.
REPLACING BULBS FROM LAMP HOLDERS
1) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling
on cord.
2) Pull lamp and plastic base straight out of lamp holder.
3) Replace lamp with only 3.5 volt, 0.42 watt super bright type lamp (provided with product).
CAUTION:
This string is rated 14.4 watts (0.12 Amps); do not overload. Connect other lighting strings or
decorative outfits end-to-end up to a maximum of 216 watts (1.8 Amps) total.
If connecting to a lighting string that does not have a wattage rating (found on the tag within 6
inches of the plug), calculate the wattage as follows:
Multiply the current which is on the flag type label located within 6 inches of the plug by 120.
For example, string is rated 120 volts, 60 Hertz, 0.51 Amps
0.51 × 120 = 61.2 watts.
Total amount of wattage that can be connected is 216 watts - 61.2 watts = 154.8 watts.
CAUTION:
To reduce the risk of overheating, replace burned-out lamps promptly. Use 3.5 volt, 0.42 watt
lamps only. To reduce the risk of fire and electric shock: 1) Do not install on trees that have
needles, leaves or branch coverings of metal or materials which look like metal and 2) Do not
mount or support strings in a manner that can cut or damage wire insulation.
