5
USER SERVICING INSTRUCTIONS
REPLACING FUSES FROM FUSE HOLDER:
1) Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2) Open fuse cover. Slide open fuse access cover on top of
attachment plug toward blades.
3) Remove fuse carefully. Turn plug over to remove fuse.
4) Risk of fire. Replace fuse only with 3 Amp, 125 volt fuse
(provided with product).
5) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6)
Risk of fire. Do not replace attachment plug. Do not remove the safety device (fuse).
Discard product if the attachment plug is damaged.
REPLACING BULBS FROM LAMP HOLDERS
1) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2) Pull lamp and plastic base straight out of lamp holder.
3) Replace lamp with only 2.5 volt, 0.425 watt super bright type lamp (provided with product).
CAUTION
To reduce the risk of overheating, replace burned-out lamps promptly. Use 2.5 volt, 0.425 watt lamps only.
5
