6
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
• Before using and reusing, inspect the product carefully. Discard any product that has cut, damaged
or frayed wire insulation cords, cracked lamp holders or enclosures, loose connections, or exposed
copper wire.
• When storing the product, carefully remove it from wherever it is placed, including trees, branches,
or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
4. Plug into a standard wall outlet or UL-approved outdoor
extension cord.
Attach four nylon tethers (A) to the inflatable (F) - two on
each side - and attach the other ends to the remaining
tether stakes (D). Insert tether stakes (D) into the
ground so the nylon tethers (A) are taut.
5. Attach the head (G) into the top of the neck of the
inflatable (F). Ensure the head (G) snaps into place for a
secure connection.
NOTE:
To remove head (G), lift up on the white tab and
lift head (G) off.
Arrange spotlight fixture (E) 3 feet or more from the
inflatable (F).
NOTE:
Light bulb not included. Use 120-watt max. 120-
volt PAR-38 floodlights or spotlights only.
5
4
A
G
D
NOTE:
Once fan is unplugged and stops blowing, the inflatable will deflate.
• To deflate, unplug fan. For faster deflation, unzip zipper after unplugging fan. Do not unplug by
pulling on the cord.
ASSEMBLY INSTRUCTIONS
