3
USER SERVICING INSTRUCTIONS
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Open fuse cover by sliding the open fuse access cover on top of the attachment plug toward blades.
Remove fuse carefully. Turn plug over and fuses will drop out.
Risk of fire. Replace fuse with only a 8 Amp, 125 volt fuse (provided with product).
Close fuse cover by sliding closed the fuse access cover on top of the attachment plug.
Risk of fire. Do not replace attachment plug. Do not remove the safety device (fuse).
Discard product if the attachment plug is damaged.
STEPS FOR ADDING SEGMENTS
All units must be unplugged before adding additional segments.
Use only extension segments model RLE-S-13mm-18.
201 ft. can be added.
TOOL REQUIRED (NOT INCLUDED):
TOOL
QUANTITY
Phillips Screwdriver
1
PROCEDURE:
1. Ensure all connections and the end cap on the last segment are tightly secured to preclude the entry of water.
2. Unscrew the screw cap from the end connector assembly.
3. Connect an extension segment by inserting the male connector into the female connector.
Make sure the ring gasket is at its position and then screw the male and female connectors together until hand tight.
