4
ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Align the two halves of the trunk (A) together.
Insert the metal rod on one half of the trunk into the
corresponding hole on the other half.
Fasten the two halves of the trunk together using
the plastic ties (AA) provided.
Hardware Used
Plastic tie
x 4
2. Insert the short metal pole at the center of the
support stand (D) into the short tube at the bottom of
the trunk assembly.
Insert the two metal rods of the four shortest
long branches (B) into the corresponding holes on
the trunk assembly.
3. Insert the two metal rods of the tallest long branch
(B) into the corresponding holes on the trunk
assembly.
Insert the two metal rods of the short branch (C) into
the corresponding holes on the tallest long branch.
Make sure the spiders and moss are hung properly
from the branches.
Secure the figure to the ground using the ground
stakes (BB) provided. Plug into a properly grounded
receptacle.
Hardware Used
Ground Stake
x 4
1
2
3
