With SD card pre-inserted
Note:
- When plugged in the Base Controller, the Controller will be turned on
and speaker is set into BT mode as default, the indicator is steady and
blue. Now the speaker is standby and ready for pairing.
- Press “Mode” button, the speaker will start to play music stored in
SD card and indicator is flashing in Red.
- Pair the mobile device with Base Controller (search and click “TOYO
Lighting Pal” in the BT list on your device)
- Follow the instruction as above (App Instruction) to play music on your
mobile devices, the speaker will cut off the SD playing and start to play
music on mobile device and indication is flashing in Blue.
- Press “Mode” button, it will switch the mode between “Blue Tooth”
and “SD card”.
- Switching from SD to BT, the music on SD will be stopped and the speaker
will continue to play the music on SD (from the stopping point) as
Controller is switching back to SD.
- Switching from BT to SD, the music will keep on playing on your mobile
device, and the speaker will continue to play music on the mobile device
(but not from the stopping point) as Controller is switching back to BT.
- You can hear a tone from the speaker as the Base Controller is turned on
- You will also hear a tone from the speaker indicating the Bluetooth device
has "paired” the Speaker.
- You can control the volume and music selection from your Mobile device.
- You can also control the volume and music from the Base Controller.
- The built-in speaker will only read the following music formats; MPS,
WMA and WAV.
- There is a runner gasket insert to prevent moisture from coming into the
device. Simply pull this away from the slot. When not in use, return the
rubber gasket back into the slot to prevent damage.
Summary of Contents for TY-T7
Page 1: ......
