④
Speed Selector Buttons:
These two buttons allow you
to adjust the speed of the currently selected function.
Push either the top button (increase) or bottom button
(decrease). Note: The speed selection will not have any
effect on the “steady” function (which is one of the 9
preprogrammed functions) or the “sensor” function (music
& lights synchronization mode). The speed rate can be
adjusted from “0” (slowest setting) to “100” (fastest setting).
The current speed setting (0—100) will be displayed
between the top and bottom speed selector buttons.
⑤
Brightness Selector Buttons:
These two buttons
allow you to adjust the brightness of the lights that are
plugged into the speaker. Push either the top button
(increase) or bottom button (decrease). The brightness
can be adjusted from “0” (off) to 100 (brightest). The
current brightness setting will be displayed (0—100)
8. Combination
9. Sensor Mode (This is the music and light
synchronization mode. If you are not playing music while
in sensor mode, the light will stay steady.)
**Note**:
Music playing will not be affected by selecting any of
the pre-programmed modes.
The lights will flash in sync with the music rhythm only
in "Sensor Mode".
Under "Sensor Mode", the louder you play the music, then
more sensitive the lights will become to the music; and the
lights will flash according to the rhythm of different music.
Under "Sensor Mode", when the sound volume is
adjusted to "0", the light will stop flashing and the
brightness will be lower than normal.
The Apps will stop working when the sound volume is
adjusted to "0" or the phone is set to mute.
The default mode of lighting is "Steady".
10