Black plate (6,1)
Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -
CRC - 11/8/13
2-6
Keys, Doors, and Windows
2. Extend the key blade and place
the blade into the slot.
3. With the vehicle in P (Park) or
N (Neutral), press the brake
pedal and the POWER
O
button
on the centre stack. See
for
additional information.
Replace the transmitter battery as
soon as possible.
Battery Replacement
{
Warning
Make sure that you dispose of old
batteries in accordance with
environmental protection
regulations to help protect the
environment and your health.
{
Caution
When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.
To replace the battery:
1. Extend the key blade and open
the battery cover on the back of
the unit.
2. Remove the used battery. Avoid
touching the circuit board to
other components.
3. Insert the new battery, positive
side facing down toward
the base.
4. Reassemble the battery cover.
5. Check the operation of the
transmitter with the vehicle.
Remote Start
This feature starts the heating or air
conditioning systems and rear
window demister from outside the
vehicle. Use remote start to heat or
cool the interior when the vehicle is
plugged in to maximise the electric
range by utilising electricity from the
electrical socket. Normal operation
of the system will return after the
vehicle has been turned on.
B
(Remote Start):
This button is
on the RKE transmitter.
During remote start:
.
The climate control system will
typically default to the last
climate setting. If the fan is off or
if Fan Only was selected, the air
conditioning or heat will turn on