HOLBERG HEO6760MBL, User Manual, Page: 18 / 38

DIGITAL TIMER USER MANUAL
SETTING THE TIME OF DAY (24 H CLOCK)
After plugging in or reconnecting to a power source after current decay, “
0.00
”, and
“
AUTO
” flashes.

Press button 1 approximately 2 sec., dot icon starts flashing. Set the current time
using buttons 2 and 3 . About 7 seconds after the set time has been finished, new data is
memorized.
The time correction can be done later;

Press button 2 and 3 approximately 2 sec., dot icon starts flashing. Then you can set
the current time.
Notice! If the correct time is not set then proper operation of the oven is not possible.
MANUAL OPERATION
If the programmer is not in semi-automatic or full-automatic mode you can use oven functions
manually.
SETTING THE MINUTE MINDER
You can activate the minute minder at any time, regardless the activity state of other
programmer functions. The measured time ranges from 1 minute to 23 hours 59 minutes.

Press button 1 until the minute minder icon starts to flash, and the display shows
“
0.00
”.

Enter the required time using buttons 3 and 2 . Minute minder icon remains on the
display.
After the set time has elapsed, an audible signal will be heard for approximately 7 minutes
and the minute minder icon starts to flash again.

Press buttons 1 , 2 or 3 to turn the signal off; the minute minder icon disappears, and
the display indicates the current time.
CHANGE THE TIMER BEEPS
The tone of the timer beeps may be changed as follows:
Press buttons
2 and 3 simultaneously,

Press button 1
to see actual tone “
ton.1
” to see on the display.

Press button 2 to select the tone you wish from 1 to 3.
CANCEL SETTINGS
Cancel automatic function settings:

Press buttons 2 and 3 simultaneously.
Cancel minute minder settings:

Press button 1 to select minute minder settings,

Press buttons 2 and 3 .