HOKUBEMA PANHANS 546|100, Operating Manual

Page: 53 / 55

BA_PH_546-100_EN_06-22.docx
53
16.2 Optional Table Systems
Article Description Art.-No.
Adjustable
Outfeed Table
At central point for re-sharpenable planing knives to adjust the outfeed
table (for surface planing) to the flying circle of the cutter block.
4643
Thickness Table
Extension 1000 mm
L = 1000 mm, B = 630 mm , with automatic height adjustment. 4339
Table Glide Rollers
2 pieces with fine adjustment in the thicknessing table, including ribbed
steel infeed and rubber outfeed rollers.
4482
Steel
Infeed Roller
Spiral toothed, instead of rubber feed roller.
Table glide rollers absolutely necessary!
4646
Segmented Steel
Infeed Roller
Pendulum-mounted for simultaneous planing of
of strips with max. thickness tolerance of 3.0 mm.
Table glide rollers absolutely necessary
4484
Switchable pull-out
(automatic outfeed)
Instead of the standard table extension. L = 400 mm, extension with 2
driven support rollers on the thicknessing table. Ideal for short parts
from approx. 320 mm in length.
4343
Infinitely Variable
Feed Rate Motor
Feed rate (3 - 24 m/min) infinitely variable via potentiometer (instead
of 7 + 14 m/min) + Indication of the feed rate via touchscreen control.
4645
16.3 Planer Guards
Article Description Art.-No.
Planer Guard
SUVAMATIC
With 2-piece fold-down cover and spring-loaded contact pressure. 3282
Planer Guard
TX MATIC
With 2-piece fold-down cover and spring-loaded contact pressure with
rollers.
3295
16.4 Special Accessories
Article Description Art.-No.
Central Lubrication
For central grease supply to all lubrication points of the machine via a
hand pump with 400 g grease cartridge. The maximum outlet pressure
is 350 bar.
4005
Central Lubrication
For centralized grease supply to all lubrication points via a hand pump
with 400 g grease cartridge. Output pressure max. 350 bar.
4859
Special Voltage 230 VAC / 50 Hz (max. 7,5 kW) 4601
Further accessories and spare parts can be found in our online shop

https://www.hokubema.com .
Only use the accessories and spare parts specified by the manufacturer. The use of other ac-
cessories or spare parts may cause injury to persons and damage to the machine. The manu-
facturer accepts no liability for any damage resulting from the use of non-authorised accesso-
ries and spare parts or additional components from third parties!