BA_PH_546-100_EN_06-22.docx
30
8.2
Control Panel Planer & Jointer (Detail View)
This section shows a detailed view of the control panel (
13
) for the planer & jointer shown in
This large view provides a better illustration of the respective operating elements.
Figure 15: Control panel planer & jointer (standard)
No. Description
2
Cutter block ON/OFF
3
Height adjustment infeed table
4
Position indicator for planing & jointing
Note:
The planer & jointer is only active when selec-
tor switch (
28
) is set to the "right" position
(see
Figure 16). Readiness for operation is signalled by the
button (
3
) lighting up.
8.3
Control Panel Thicknesser (Detail View)
This section shows a detailed view of the thicknesser control panel (
1
) shown in
Figure 13 (on the right for
the standard version and on the left for optional equipment). This large view provides a better illustration of
the respective operating elements.
Figure 16: Control panel thicknesser (standard)
Figure 17: Control panel thicknesser (optional)
Nr. Control panel for standard machine
Nr. Control panel with optional equipment
14
Cutter block ON/OFF (thicknessing area)
14
Cutter block ON/OFF (thicknessing area)
15
Rotary switch thickness feeder ON/OFF
a) with feed rate
I
→
7 m/min
b) with feed rate
II
→
14 m/min
15
Push-switch thickness feeder ON/OFF (option)
16
Potentiometer for variable feed rate (option)
28
Selector switch planer & jointer = active/inactive
28
Selector switch planer/jointer active / inactive
29
ON/OFF switch for outfeed table (option)
0 I II
15
Standard
14
28
0 II
1
2
3
4
5
0
.
.
.
.
.
.
Optional
15
16
28
29
14
4
mm
3
2