OWNER'S MANUAL
PAGE 37
ROC-IT 402 ASSEMBLY
Belt and Cable Tension:
Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be
•
sure they are properly attached.
Check slack in cables and re-adjust cable tension if needed.
•
Seat Sleeves, Guide Rods:
Wipe down adjusting tubes with a dust free rag before applying lubricant.
•
Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.
•
Linear Bearings:
Referring to the Owners Manual carefully disassemble the bearing from its housing and place a
•
finger full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your
finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing
tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.
GENERAL MAINTENANCE INFORMATION
PLEASE KEEP THIS FOR YOUR RECORDS
(CONTINUED)
