Hoist Fitness Mi6, Owner'S Manual

Page: 62 / 79

ITEM NO. PART NUMBER DESCRIPTION QTY.
36 026-01M3328 .375" CRS HANGER 1
37 026-01P5828 SHIELD-3 1
38 026-01PL0235-36 OPEN END GRIP: Ø1.188" X 8.25" LG. 2
39 026-01PL0369 WEIGHT STAND OFF 4
40 026-01PL2510 ELLIPTICAL RUBBER FOOT W/ FRONT LIP & TAPE 2
41 026-01PL2614 BOOT-3 2
42 026-01PL2615 BUMPER 4
43 026-01PL2617 FLANGED SPACER 8
44 026-01PL2622 TOP CAP 1
45 026-01PL2597 SHIELD-1 1
46 026-01PL2628 COLUMN SLEEVE 4
47 026-01PL2631 CATCH 1
48 026-01PL2632 PANEL-1 1
49 026-01PL2634 CUP / BAR HOLDER-1 1
50 026-01PL2635 CUP / BAR HOLDER-2 1
51 026-01PL2636 CATCH RETAINER 1
52 026-01PL2644 BOOT 2-1 1
53 026-01PL2645 BOOT 2-2 1
54 026-01PL2646 BOOT 1-1 1
55 026-01PL2647 BOOT 1-2 1
56 026-01PL2641 FOOTCAP, 1.9685" X 3.9370" F.O. 2
57 011-0711001 SET SCREW: 1/4"-28 X .25" LG. (Ni) 1
58 012-0503001 1/2"-13 FLANGED NUT (Ni) 4
59 012-0504009 16M X 2.0 FLANGED NUT (Ni) 1
60 012-0504017 1"-8 Thin Nylock Nut (Ni) 4
61 014-0012025 BALL BEARING: SELF ALIGNING,Ø30mm I.D. X Ø62mm O.D. X 16mm 4
62 014-0015040 Retaining Ring, E clip, 1/2" 2
63 014-0015041 Internal Retaining Ring, 2.44" 4
64 014-0012024
BEARING: 608-2RS_BEARING (8mm BORE) with 1.00" OD PVC outer ring
608-2RS Bearing with 1.00" OD PVC outer ring
8
65 018-0001001 PULLEY: 2" BLACK W/ CONV. GRADE BEARINGS 4
66 018-0001002 CABLE PULLEY: Ø3.50" 12
67 019-0001001 PLUG BUMPER 4
68 019-0001006 THICK RUBBER DONUT 3.00" X .50" BLACK 4
69 020-0011018 Compression Spring 2
70 013-1002014 3/8" FENDER WASHER (BZ) 4
PART LIST CONTINUED
OWNER'S MANUAL
Mi6 ASSEMBLY PAGE 61
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED