Hoist Fitness CL-2403, Owner'S Manual

Page: 49 / 67

FITNESS SYSTEMS
R
HOIST
2403 Assembly Page - 48
OW N E R S
M A N U A L
Continued: GENERAL MAINTENANCE INFORMATION
Belt and Cable Tension:
Seat Sleeves & Oilites:
Linear Bearings:
F
Referring to the Assembly/Owners Manual, when belts or cables are used check all bolts and attachments to be sure
they are properly attached.
Check slack in belts or cables and readjust tension if needed.
Wipe down adjusting tubes with a dust free rag before applying lubricant.
Lubricate seat sleeves and oilites with a Silicon or Teflon based lubricant spray.
Referring to the Assembly/ Owners manual carefully dis-assemble the bearing from its housing and place a finger
full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the
ball-bearings and their tracks. Repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the
bearing and wipe off excess grease.
F
F
F
F
F
Anti-Skid Surfaces:
These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
PLEASE KEEP THIS FOR YOUR RECORDS.