⑤
Mode switch
You can switch to different
working mode by pressing
the 5-way joystick. Please
refer to the following
introduction.
④
Power on
Power on the Gimbal. Press
the function button until the
indicator flashing
twice.
A. GoPro Hero 5
Step 1: Put the pitch motor to the RIGHT side, and
rotating the adjustable knob by clockwise direction
(Tighten if by opposite direction)
Step
2: Place GoPro Hero5 closely to the back clip as
picture and tighten the knob to secure its position. Double
tighten by the 2 long screws against violent movement
.
B. GoPro Hero 4/3/YI CAM/SJCAM
Step
1: Put the pitch motor to the LEFT side and
rotating the adjustable knob by clockwise direction
(Tighten if by opposite direction)
Step
2: Place Hero4/3/YI/SJCAM etc closely to
the clip as picture show and tighten the knob to
secure its position. Double tighten by the 2 long
screws against violent movement.
etc.
Function Button
Long Press: Power on/off
5-Way Joystick
④
⑤
A
B
Signal Indicator Light
●
●
Flashes twice: Power on/off
Turn off: Bluetooth is not connected
●
●
●
●
Flashes once: Panning mode
Flashes twice: Panning and pitching mode
Flashes for three times: Lock mode
Keeps flashing: Low battery
Status Indicator Light
Charging status: If the status indicator light is flashing,
means charging. If the light constants on, means
charging is complete
.
Middle
button: Switch
the
working
mode
Single
Press: Panning
Mode
Following
Double
Press: Panning
and
Pitching
Mode
Following
Triple
Press: Lock
Mode
Following
Long
press
for
6
seconds: Enter
the
initialization
Left/Right: Panning angle adjustment
●
●
●
●
●
3. Light Instruction
4. Controlling instruction
③
Mount
and
Balance
the
Action
Camera
