Step #3: Installing The Grill: Undo the 3 screws that attach the factory
grill to the inner fairing and put it aside. The Hogtunes grill is installed
using the 3 factory screws just removed. In the Hogtunes grill, you will
see two holes and one “keyhole” where the screws go through and
into the fairing. The keyhole in the Hogtunes grill needs to be oriented
so it is closest to the radio on each side for proper fitment! With the
new grill in place the cabinet can be re-installed to the bike.
Repeat Step #3 for the second cabinet. Plug the factory speaker wires
back into each cabinet’s speaker wires . Make sure to plug the power
cable back into the power port/cigarette lighter assembly on the brake
side. If your bike has the CB module, make sure to re-install the
antenna cable and main harness. Re-install your fairing and windshield
and you are done!
Customizing the Grills:
You will have noticed that your new grills are pretty thick. The main
reason for this is so the grills would not likely warp during most
finishing processes such as polishing, powdercoating, chroming etc.
The grills in this kit look great the way they are, but custom finishing
them is an easy way to customize the look of your inner fairing!
See your dealer or painter to discuss options right for you.
Harley-Davidson, Electra Glide, Street Glide, Ultra Classic, are Trademarks, and/or Registered
Trademarks of Harley-Davidson, Inc., Milwaukee, Wisconsin, USA, and if Used or Implied are
for Reference Only. There is No Affiliation Between Harley-Davidson, Inc., and Hogtunes Inc.
