---------------------------------------------- pg5 ----------------------------------------------
---------------------------------------------- pg14 ----------------------------------------------
----------------eXerbike Upright Cycle User Manual-----------------
----------------eXerbike Upright Cycle User Manual-----------------
Calories, Distance, Watts
This number tells you a general indication of the calories you have
burned based on the time, speed and resistance level of your workout.
The Calories number alternates with distance and watts by touching the
button on the Operating Status Window.
R.P.M./ M.P.H.
This number in the Operating
Status Window monitors and
displays your workout speed in
pedal revolutions per minute
ormiles per hour.
Bar Graph Readouts
Resistance
The bar graph shows the resistance level the eXerbike Upright Cycle is
set at. The number of bars showing on the graph increases as you
increase the resistance (turn the Resistance Level knob clockwise), and
decreases as you lower the resistance (turn the knob counterclockwise).
Target Pace
The bar graph is a pace-monitoring device. Once you have reached your
workout pace, touch the Target Pace switch below the window to
activate the bar graph.If you increase your pace the bar will rise. If you
decrease your pace the bar will drop.
Touch Buttons
The buttons located on the sides of the Operating Status Window are
touch sensitive. To activate a switch, simply touch it lightly. Pressing
hard is not necessary and may damage the console.
Note:
This unit has a
built-in automatic shut-off after 33 seconds, to preserve battery life.
Maintenance and Service
The fitness environment is torturous on equipment; hours of use,
chemicals, perspiration, and humidity can all take a toll on machinery.
Here are some good reasons to maintain your equipment:
1. Reduces the risk of injury.
2. Equipment that looks new and functions properly holds its value. The
life span of well-maintained equipment is more than double the life of
neglected equipment.
eXerbike Upright Cycle’s straightforward design,solid construction, and
quality components were chosen in order to provide years of virtually
maintenance-free operation. Much of what is true for HOGGAN Health
Industries maintenance applies to all equipment in a commercial fitness
environment: Heavy use requires an alert maintenance crew.
Routine Maintenance Checklist
Weekly
• Operate the machine through a full range of motion, in both
directions checking for smooth operation.
• Check all moving parts and pivot points for excessive wear.
Replacebushing or bearings if necessary.
• Check all belts for correct tension and tighten if necessary. Replace
any belt that is worn, or damaged.
• Check frame nuts and bolts and tighten if necessary.
Monthly
• Thoroughly clean
• Test Machine functions
• Inspect for any loose, worn or broken parts.
Summary of Contents for eXerbike
Page 1: ...User Manual...
