background image

Note: To use it for the first time, please turn on the switch, then charge the solar product by placing it under direct sunshine for 5 to 

8 hours. Then the light can work at its best performance. (since the battery may drain out over time, so we neet to charge the battery 

before using it for the first time).

IMPORTANT SAFETY DETAILS

1. 

 

This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical  

 

and safety regulations relevant to the country it is being installed.

2.

  

Please handle carefully, avoid rough handling and collision.

3.

 

This product may NOT be installed by minors or people with a mental disability.

5. 

Please keep the surface of the solar panel clean, to make sure the product works at it’s best performance.

6.  

It is important to install the light in a location that receive full sunlight each day, away from the shade caused by trees, buildings etc. Shady  

 

locations will not allow the battery to be fully charged and will reduce the hours of night time light.

7.  

The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy  

 

days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time.

8.

 

Select an outdoor location away from other light source at night such as street lights. It may cause the product not to turn on automatically 

 

at night.

9.

 

Dispose the used battery properly! Do not dispose the battery in fire!

PRODUCT FEATURES

1. 

 

Using solar power supply and LED lighting, the perfect combination, energy-saving, environmental

2.

 

The light charge during the daytime and automatically turning on at night

3. 

 

Waterproof, weather resistant

4.

  

Easy installation

DIRECTIONS FOR USE

1. 

 

Turn the switch to ON position by push the key pin into the ON/OFF key hole, the light starts to work automatically. During the day,  

 

 

when the environment light is larger than 100 lux, the built-in light sensor will cut off the power output and charge the battery by the power  

 

produced by solar panel. When the night falls, the environment light is lower than 100-10 lux, the light turns on automatically.

2. 

 

Working time: After the solar panel has charged in direct sunlight for 5-8 hours, the solar light can light up to 8-10 hours.

3. 

 

Product maintenance: to ensure that the product works well, every 3 months need to clean the dust on the solar panels, so that the effeciency  

 

of solar panels is better.

4.

 

The battery included is 3.2V 2000 mAh. Battery should be replaced after 2-3 years.

Reviews: