INSTALLATION
Install it on the wall or other outside place with screws directly. Please pick a location where the product can have adequate amount of sunlight.
There are two ways of installation possible: as a ground spike of wall mounted.
MAINTENANCE AND ATTENTION
1.
Before using the solar light for the first time, leave the light under direct sunlight for about 6-8 hours. The light will achieve optimum light
output after the enormous exposure to the sunlight.
2.
Please keep the surface of the solar panel clean, to make sure the product works at it’s best performance.
3.
It’s important to install the light in a location that receive full sunlight each day, away from the shade caused by trees, buildings etc. Shady
locations will not allow the battery to be fully charged and will reduce the hours of night time light.
4.
This solar panel includes a built-in photo sensor, which detects the level of surrounding natural light and controls when the light will
automatically switch on and off. The solar panel should be placed at least 2 meters apart from another spotlight and away from other night
time sources as this might keep the solar lights from automatically turning on at dusk.
5.
The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy
days and during winter, the solar light will nog receive as much direct sunlight, resulting in reduced brightness and reduced operating time.
