INSTALLATION DETAILS
1.
Turn the solar light on with the ON/OFF switch (fig. 1).
2.
To use the solar light as a garden spike, use the supplied extention pole and spike (fig. 2).
3.
To use the solar light as a wall light, use the supplied wall plugs and wall screws, to mount the solar light on the desired surface (fig. 3).
4.
Adjust the solar light as desired. Adjust the solar panel so that it can receive the maximum amount of sun light as possible (fig. 4).
SWITCHING BETWEEN LIGHT MODES
Press the on/off button to switch between the different light modes.
Light mode 1:
In this light mode the Pato illuminates with a light output of 15 Lumen and jumps to a light output of 200 Lumen when detecting
movement. This makes the Pato very suitable as a scare light.
Light Mode 2:
In this light mode the Pato illuminates a constant light output of 80 Lumens. Perfect for highlighting a bush or small tree. In this
setting, the Pato is suitable as garden lighting.
1.
2.
4.
3.
90°
102°
BATTERY REPLACEMENT
The performance of the battery may decrease over time (usually about
1-2 years), please replace the battery as shown on this picture.
1. Remove the 4 screws
2. Replace the battery
EN
