HOW TO USE
TURN ON THE SWITCH
The switch is located at the back side of the solar panel. Turn on the switch, the lamp will start to work automatically (the product has a light sensor
built-in to enable the lamp to turn off light and charge during the day and turn the light on during the day automatically).
INSTALLATION
No protective film cover the panel, install it on the wall or other outside place with screws directly. Please pick a location where the product can have
adequate amount of sunlight. Two ways of installation: spike for ground, and base for wall mounted.
1. WALL MOUNTED
2. GROUND MOUNTED
ADJUSTMENT
The lamp is flexible in adjusting the angle of light spot and the solar panel. The lamp lighting projector can be adjusted by 90 degrees, and the solar
panel 180 degrees.
Mode 1: Dim light is activated by pressing the on/off button one time
Mode 2: Bright light is activated by pressing the button a second time
To turn the light off press the button a third time
