Always read the instructions carefully before installation, failure to do this could result in damage
to the product, property or harm to the installer.
Install only by certified electricians.
It is recommended that this product is used on a circuit board protected by an Earth Leakage
Circuit Breaker or Safety Switch.
Allow suitable ventilation around the light fitting and do not cover with any material.
Do not immerse any part of the light fitting in water or any other liquids.
Regularly inspect the light fitting to ensure that no damage has occured, if damage is found
cease use and replace.
Do not attempt to modify this fitting in any way.
The LED driver and LED module are not replaceable.
Always install luminaires with the power switched of of isolated off to the area of installation.
IMPORTANT INFORMATION
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE:
220-240AC
IMPACT RESISTANCE:
IK10
DIMMABLE:
Yes
BEAM ANGLE:
180°
COLOR TEMPERATURE:
Switchable 2700K/4000K/5000K
LUMEN: 12W
1150 - 1200 Lumens
18W
1790 - 1900 Lumens
25W
2300 - 2600 Lumens
IP RATING:
IP65
CRI:
>80Ra
MOUNTING TYPE:
Surface mounted
1
2
3
4
5
6
7
8
9
5
| © Copyright 2021 Hoftronic
