Page 3-24
Chapter III Operation
View Specifi cations
This screen displays Year, Manufacturer, and Model
of the selected vehicle with Minimum, Preferred and
Maximum specifi cations for the front and rear wheels.
Dashes in any position indicate there are no manufac-
turer specifi cations for that wheel or angle. For angles
not displayed on this screen, refer to the specifi cation
book included in the literature package. The “Informa-
tion Systems” icon at the top of the screen contains
access to assistance available for adjusting that angle.
Clicking on the desired icon launches the adjustment
help features described on the next page. The Edit
Specs toolbar button (F8) allows editing of the displayed
specifi cations prior to beginning the measurements.
This is useful if a Technical Bulletin has been issued
that alters manufacturer’s specifi cations.
Editing Specifi cations
Use the pointer to click on the specifi cation edit icon
as shown to the left. Click on the number to be edited
(i.e. left camber). Once it is highlighted, enter the
desired value.
Use the pointer to move to any other values to be
changed. When all editing is complete, click on
NEXT.
Since these edited specs are now custom, enter in a
description of the new custom specifi cation which can
be recalled later.
Vehicle Stability Programming
If the vehicle selected features a Vehicle Stability As-
sistance programming (VSA), some adjustments may
be necessary after alignment which are required by the
manufacturer. The screen shown to the left appears
informing the operator that additional diagnostics or
calibrations may be required. In many cases an optional
scan tool is required to perform system resets or zero
adjustments to certain sensors.
Summary of Contents for Pro42
Page 1: ...Operators Manual Portable Imaging Alignment Systems with Pro42 ...
Page 2: ...Blank page ...
Page 8: ...Page 8 Table of Contents ...
Page 65: ...NOTES ...
