1.3 General safety rules
Only properly trained and authorised personnel shall be al-
lowed to operate the wheel balancer.
The machine must not be used except for the scope of ap
-
plication and in the way specified in this manual.
Unauthorized changes and modifications to the machine
relieve the manufacturer from any liability for damages and
injuries that might result therefrom.
On no account should safety features be removed or made
inoperative.
In general any work on the electrical system such as fitting of
a plug or changing of connections, if necessary, must be car-
ried out by a qualified electrician in line with relevant national
standards and the regulations of the local power station.
It should be noted that working with technical equipment may
involve an unforeseeable acceptable risk.
Therefore the operator should eliminate such dangers in
advance by proper and wise behavior.
The following special points should be observed:
Use technical equipment for its specified scope of application
only.
Always use suitable and proper equipment and tools.
Follow the instructions, notes and technical data of the
machine manufacturer or manufacturer of the wheels to be
balanced.
Wear suitable protective clothing and accessories (e. g.
goggles, safety shoes, helmet).
For further safety rules to be observed, please refer to the
individual chapters.
1
2
1
3
2800
2600
6
4
5
Safety rules and function
Fig. 1
View wheel balancer
Front view
1
Weight tray
2
Display and key pad
3
Wheel guard
4
Gauge arm for distance rim/machine and rim diameter
5
Pedal
for main shaft lock
6
Rear view
Operation manual geodyna 2600 EEWB703D
3
