VECTOR et
brief instructions
Quality makes the Difference
for patients
as of device software 2.140
This document does not replace the
manufacturer‘s user‘s manual. Follow
the user‘s manual.
SETTING THE PARAMETERS
The following 3 keys are available to set parameters at the device:
4%/!*1
Q'!%)!MM;BL;;
Programing key
Programing key
Enter key
1. Press the enter key
for approx. 1 second.
2. Switch to the next parameter with the programing key
in following sequence:
4%/!*1
Q'!%)!MM;BL;;
4%/!*1
Q!(!/! %(/!.
4%/!*1
Q0'MMMMMMM0!
4%/!*1
Q),MMMMMMMMMMMM@;)%*
4%/!*1
Q0'!0/MMMMMM>;0
4%/!*1
Q1/+MMMMMMMMMMMM/./
4%/!*1
Q%0,(5MMMMMM
4%/!*1
Q.%#$/*!00MM<;;N
4%/!*1
Q/!MMMM=@ 5 <<
4%/!*1
Q%)!MMMMMMMMMMMM<>L;;
A
fl
ashing arrow
shows the active parameter.
3. Press the enter key
to change a parameter.
4. Adjust the desired value with the programing key
and
.
5. Con
fi
rm the new value by pressing the enter key
.
ALARM CLOCK ON/OFF
•
Activate the alarm clock by using the programing key
. The bell symbol appears
at the display.
•
Using the progaming key
the alarm clock will be deactivated. The bell symbol
disappears at the display.
SETTING THE WAKE-UP TIME
1. Press the enter key
for approx. 1 second.
2. Select
Wake Time
by using the programing keys
and
.
3. Con
fi
rm by pressing the enter key
.
4. Set the wake-up time by using the programing keys
and
.
5. Con
fi
rm the wake-up time by pressing the enter key
.
INFO-MENU
Enter the Info-Menu by pressing the info key
i
. Here all adjusted parameters can
be recalled. Changes of these parameters can only be done by your physician or authorized
dealer.
START/END THERAPY
To start or end the therapy, press the on/off key.
only VECTOR et AUTO
Programing keys
Enter key
Display
Heater LED
Info key
Heater key
Unlocking
button for
humidi
fi
er
Connection for
measuring tube
Connection for
therapy tube
Contact socket
for humidi
fi
er
on/off key
Filter cassette
RS232 interface
Power connection
24 V DC
Remove SD card:
Rating plate
Insert SD card:
