6
Section 2: Installation
General
The Dripmaster installation procedure is simple and does not require any special tools, but requires
site preparation.
Well Site Requirements
•
Line power (115 VAC or 220 VAC), or 24 V DC/AC must be available at the well pump.
•
An eight-wire control cable (containing wires not smaller than 22 AWG) needs to be laid
between the well pump and the local PLC enclosure.
•
A sturdy, vertical pole with a welded metal plate should be in close proximity to the well pump.
Note:
For large oil tanks (35 to 50 gallons), mount the Dripmaster to the oil tank stand.
