HOFFLIGHTS 5.0110.2211, Installation Manual

Page: 19 / 36

INSTALLATION MANUAL
19
hofflights.com IMH-101 v.01
POLYNESIA
CANOPY ASSEMBLY
BLADE ASSEMBLY
ASSEMBLY WITHOUT LIGHT KIT LIGHT KIT ASSEMBLY
Fix the 2 screws on the bottom of the
boom and loosen the two screws. Hoist
the canopy onto the hanger. Place the
rounded corner of the slotted hole in the
canopy push upward over loose screws
on the hanger. Rotate canopy lock. Then
tighten screw safe.
Insert one side of the blade mounting
hole into the direction of the long strip
hole on the main side of the motor. Then
use the blade screw to tighten the blade
pressure plate with the blade.
Note: Tighten blade screws twice a year.
Locate slots on metal cover and align with nodules on
inside of motor plate. Gently push up on metal cover
and turn to the RIGHT (clockwise) until it slides comple-
tely into place
If you wish to use the light kit, please purchase light
kit separately.
Connect wire from motor housing to wire from the LED
light kit. Make sure quick connection snap together
completely. Locate slots on LED light kit and align with
nodules on inside of motor plate. Gently push up on
LED light kit and turn to the RIGHT(clockwise) until it
slides completely into place.
Screw
Screw
Hanging
bracket
Canopy
Motor
housing
Blade tablettings
Blade screw
Motor
housing
Motor
plate Nodules
Slots
Motor
housing
Motor plate
Nodules
Slots
Quick connection