3
20
6. SET CONTENTS
7. USE
7.1 Charging
The device signals a low battery level with a double beep.
To charge the device, connect its charging cable to:
a) Computer
• Connect the charging cable plug to the charging port
of the device, then insert the USB connector to you computer’s
USB port. Make sure that the computer is turned on.
• After connecting the cable to the computer, the LED will light
up and all of the LEDs will flash.
•
When the device is fully charged, the LEDs stop flashing
and the LED indicator lights off.
b) Power adapter (not supplied)
• Connect the charging cable plug to the charging port
of the device, then insert the USB connector into a USB
port of a power adaptor with parameters compliant
with the device label. Connect the power adapter to a mains
outlet with the same power characteristics as those stated
on the power adapter label.
•
After connecting the cable, the LEDs will light up and start flashing.
•
When the device is fully charged, the LEDs stop flashing and the LED indicator
lights off.
Caution! Charging time –
approx. 130 minutes.
The device set should contain the following items:
1 x Cavity peeling machine with cap
1 x USB charging cable
1 x User manual
Open the packaging and carefully take out the device. Ensure that the package is
complete and none of its contents are damaged. Check that the plastic parts are
not broken. If any part is damaged or missing, contact the dealer and do not use
the product. Keep the package or recycle it in accordance with local regulations.
Caution! For safety, keep the packaging parts (plastic bags, cardboard
boxes, Styrofoam etc.) out of the reach of children. Risk of suffocation!
