3
33
7. USE
7.1
DOCKING STATION INSTALLATION/CHARGING
1. Place the docking station on the floor, along the wall, next to a power outlet.
Caution!
Place the docking station along the wall, in an area where there are
no obstacles which might hinder the vacuum cleaner operation. The minimum
distance from the front is 2 m, and 0.5 m on each side (see figure below).
2. Connect the power adapter to the docking station.
3. When connected, the red indicator lamp will light up to indicate that the sta-
tion is ready for use.
The device has three charging methods:
A:
Automatic return to the docking station
When the battery charge level in the device is low, the indicator lamp will light
up orange, and the device will emit a warning beep to indicate that the battery is
low. The device will switch to the mode of searching for the docking station, and
will automatically connect to it to recharge.
B:
Automatic return to the docking station
When the main unit is ready or operating, press the “Charge” button on your
mobile device. The main unit will search for the docking station in order to
recharge.
C:
Manual operation
Manually place the main unit at the docking station to recharge the device auto-
matically. Pay attention to the proper connection between the charging electro-
des/poles at the bottom of the main unit and the charging electrodes/poles in
the docking station.
