24
4 .
Place the auger in the filter. The auger’s metal pin must be pointing downwards.
5 .
Put the bowl on the device body. When inserting the bowl, the dot on the bowl must
be in the position of the open padlock on the body. Twist the bowl in the locked
padlock direction to lock it in place.
6 .
Make sure the auger matches the bolt. If not, align it and push to fix. When the auger
is correctly installed, it cannot rotate.
7 .
Place the top lid. The “triangle” mark on the top lid must point to the open padlock
symbol on the bowl. Next, twist the top lid in the direction of the locked padlock to
lock it in place.
Caution! If all the parts are not correctly installed, the device will not work.
8 .
Place the juice and pulp containers under the relevant openings.
9 .
The device is ready for use.
7.3
Device disassembly
To disassemble the device, perform the assembly steps in reverse order.
1 .
Put the juicer and pulp containers aside.
2 .
Release the top lid safety lock by twisting the top lid with the feeder into the open
padlock direction. Remove the lid.
3 .
Twist the bowl in the open padlock direction. Remove the bowl.
4 .
Remove the auger and the mesh filter.
7.4
Switching the device on/off
1 .
To switch the device on, carefully install the top lid with the feeder on the bowl to
disengage the safety lock.
2 .
To turn the device on, rotate the on/off/reverse mode switch to 1.
7.5
How to prepare the fruit and vegetables for juicing
• Use fresh, slightly unripe fruit and vegetables as they contain more juice.
• Thoroughly wash the fruit and vegetables intended for juicing.
Summary of Contents for POJM210564
Page 1: ...INSTRUKCJA INSTRUCTION MANUAL SLOW JUICER WYCISKARKA WOLNOOBROTOWA ...
Page 2: ......
Page 16: ......
