3
29
7.3 OPERATION
1. After you have completed the activities described above, select the nozzle you
will use for vacuum cleaning.
2. Grasp the plug and pull the power cord out from the vacuum cleaner.
Note! Before you start vacuum cleaning, unwind the power cord to the desired
length and insert the plug into an outlet socket. A yellow marking on the power
cord means that the cord is about to be completely unwound. Never pull the
power cord out beyond the red marking.
3. Insert the plug into an outlet socket. Make sure that the voltage in the socket
matches the voltage specified by the manufacturer of the vacuum cleaner on
the label.
4. Press the On/Off button to start the motor of the vacuum cleaner.
5.
After you have finished vacuum cleaning, press the On/Off button to turn the
appliance off.
6. Remove the plug from the outlet socket and press the automatic cord rewind
button.
Note! When rewinding the cord, hold it by the plug so as to prevent the cord
tangling and to make sure that the plug does not hit hard against the housing
of the appliance.
7.4
SUCTION POWER ADJUSTMENT
You can adjust suction power by moving the suction control slider.
Close the suction
control slider to
increase suction
power
Open the
suction
control slider
to decre-
ase suction
power
Summary of Contents for POJM190261
Page 1: ...ODKURZACZ VACUUM CLEANER INSTRUKCJA INSTRUCTION MANUAL...
Page 2: ......
