3
28
7.2 Mixer operation
Depending on the type of ingredients, the bowl (3) with the lid may be used to
prepare a wide variety of foods.
1. Place the appliance close to an easily accessible power supply socket.
2. Turn the lever (4) towards the open padlock symbol, to raise the mixer arm (1) .
3. Place the bowl in the base and then turn the bowl to the left until it locks in
place.
4. Put food products into the bowl.
5. Fix the lid to the arm head and move it to the right until it locks in place.
6. Select the desired attachment and attach it to the mixer spindle. The
attachment should be matched with the tabs on the spindle, pressed towards
the mixer head and turned right until it locks in place.
7. Turn the lever (4) to the open padlock position and press the arm down until
it gets to the horizontal position. Then release the lever so that it returns to
the closed padlock position.
8. During the preparation process you may add ingredients through the opening
in the lid.
9. Make sure that the rotation speed controller is set to the “0” position and that
the blender socket cover is slid on. Connect the mixer to the mains .
Attention! The device has a blockade that prevents the mixer from operating
without the blender cover on.
10. Set the desired rotation speed to start the appliance. For the operation
mode selector description, see the section entitled
Operation mode selector
description.
Warning!
Do not put any forks, knives or spoons into the bowl during mixer operation.
11.
When the task is finished, move the operation mode selector to the “0”
position and disconnect the appliance from the mains.
12. If residues need to be scraped off a beater, an agitator or the bowl, use a
wooden spatula.
13. Lift the arm, remove the attachment, then remove the bowl cover.
