HOFFEN NB-9561, Instruction Manual

Page: 25 / 28

3
25
leave the blade caps on the bottles for this purpose.
Caution!
Do not exceed the maximum capacity of the bottles (430 ml or 1000 ml) — these
values are marked on their external surface with dashes and the MAX label.
The MAX level means the bottle is filled to the maximum, when it is placed on
its base with the opening pointing up. Some blends can increase their volume
during mixing. For this reason, it is recommended to perform some tests when
blending new ingredients, exercising particular control/attention.
Caution!
During operation, some ingredients might stick to the bottle walls. If that is the
case, stop the device, disconnect it from the mains, remove the bottle with the
installed blade cap, and shake it, or open to additionally mix the ingredients with
another kitchen utensil.
Caution!
If the blades become jammed during operation, immediately release the on/
off switch or turn it off, disconnect the device from the mains, and remove the
bottle with the blade cap to remove the cause of the jam.
Caution!
The blades are sharp. Observe particular caution when in contact with the
blades.
Correct and regular cleaning will improve the safety and extend the life span of the
device.
Warning! Switch off the device, unplug it and let it cool down before
cleaning and maintenance to avoid electric shock and burns.
• Do not install the bottle with the blade cap twisted on if the cap is wet.
• Do not immerse the base unit in water or other liquids.
• Do not use corrosive cleaning agents.
Bottle cleaning
Clean the device in accordance with the instructions and leave it to dry completely.
1. Disconnect the device from the power source.
2. You may clean the bottles in a dishwasher or under running water with some
washing-up liquid.
3. Wash the blender blade caps under running water with some washing-up
liquid.
4. For more stubborn dirt, pour some water into the bottle, attach the blender
8. CLEANING AND CARE