HOFFEN KS-1553-A, Instruction Manual

Page: 16 / 20

16
The device does not contain any user-serviceable parts . Do not attempt to repair
the device on your own. Always have a specialist perform repairs.
Remove the batteries from the device before you start cleaning it .
Wipe with a slightly damp cloth with some dishwashing agent, then wipe the scale dry .
Do not use any caustic agents for cleaning the device .
Protect the device from penetration by water or other liquids .
Do not immerse the device in water or other liquids .
8 CLEANING AND CARE
9 REPAIR
• Before you read the result, wait until the triangle icon is shown on the display .
It means the measurement is finished.
• The current unit of the weight reading is shown on the display . When you change
the unit, the unit indicated on the display will change .
• To switch off the scale, press the ON/OFF/TARE button and hold it for 3 seconds .
• The scale will turn off automatically if idle for approximately 120 seconds .
7.3 Changing the weight units
After switching on the scale, you can change the weight unit using the UNIT button – g,
lb:oz, ml . Each subsequent press changes the unit in the following sequence:
•
Weight: g
• Weight: lb:oz
• Water: ml
• Milk: ml
7.4 Resetting
After the scale is turned on, it resets automatically regardless of the items placed on it .
This function may be used for taring when starting up the scale .
7.5 Taring
After turning the scale on, you can use the taring function to obtain the weight of your
product without its packaging . In order to do this, weigh an empty package (e .g . a jar),
press the ON/OFF/TARE button, wait until the displays shows 0, then weigh your product
together with the package (e .g . a jar with grain inside) .
7.6 Indicators on the display
O-Ld
Displayed when the maximum capacity is exceeded, i .e .
slightly above 5 kg (5000 g), precisely when 5199 g is
exceeded .
Lo
Displayed when the batteries are low . Replace the batteries
immediately .