3
29
Caution!
The blades are sharp. Observe particular caution during contact with the blades.
Warning!
Switch off the device, unplug it and let it cool down before
cleaning and maintenance to avoid electric shock and burns.
Correct and regular cleaning will improve the safety and extend the life span of
the device.
• Do not install the bottle with the blade cap twisted on if the cap is wet.
• Do not immerse the drive unit in water or other liquids.
• Do not use corrosive cleaning agents.
Bottle cleaning
Clean the device in accordance with the instructions and leave it to dry
completely.
1. Disconnect the device from the power source.
2. Empty the bottles, wash them and the blender blade cap (or the bottle carrying
lids, if necessary) using typical household dishwashing liquids.
3. For more stubborn dirt, pour some water into the bottle, attach the blade cap
and install the bottle on the drive unit base. Then, run the device several times.
4. Leave to dry.
Blade cleaning.
1. Disconnect the device from the power source.
2. Take off the bottle with the attached blade cap from the base.
3. Wash the blades under running water with some dishwashing liquid.
4. Leave to dry.
Caution!
The blades are sharp. Observe caution during contact with the blades.
Caution! Wash the blade surrounding using a dishwashing brush.
8. CLEANING AND CARE