[55]
EN
DEHUMIDIFIER
Operation
•
Place the appliance on a stable, flat and dry surface, in the upright
position.
•
Make sure that the appliance is switched off at the on / off button (P)
before connecting it to the power supply and that the drainage tank (G)
is empty and properly seated.
•
Fully unwind the power cord (I) and connect the appliance to the power
supply.
•
The light of the on / off button (P) turns on immediately and stays on
for as long as the appliance is connected to the power supply.
•
Press the on / off button (P) to start the appliance and raise the air
outlet grille (C). The air humidity level is shown on the display (J) and
the environment temperature is shown on the display (M).
• Press the ventilation speed button
(N) to set the fan speed between
high or low.
• Press the humidity level indicator button
(O) to set the desired
humidity level from 40 to 80% in 5% intervals.
• During operation, after the desired humidity level has been reached,
the compressor stops working, but the fan can remain in operation for
safety and durability of the equipment. The fan will only turn off if you
press the on / off button (P).
• Note:
The automatic operation of the fan is related to device safety
issues.
• Press the timer button
(K) to set the time after which the unit will
stop working automatically from 1 to 24 hours. The timer is deactivated
as soon as you switch off the appliance manually. The programmed
time remains unchanged if the appliance stops working due to the full
drainage tank (G) or during the defrost period.
•
As soon as the drainage tank (G) is full, the full tank indicator (L) lights
up and a sound warning of 15 consecutive beeps sounds to alert the
user that it is necessary to empty the tank (G).
•
Remove the tank (G) by gently pulling it with both hands through the
side recesses and pour all the water. Refit the tank and the appliance
will resume operation. During this process the full deposit indicator
•
(L) lights up red and flashes until the tank (G) is replaced in the main
body of the appliance.
Note:
The drainage tank (G) must be properly fitted for dehumidifier
to function.
•
To switch off the appliance press the on / off button (P).
• If you intend to move the appliance, or if you do not intend to use it
