3
24
7. OPERATION
7.1
Before use
1. Unpack the appliance.
2. Check that the power supply parameters of the appliance
(220 – 240 V~ 50/60 Hz) correspond to the parameters of the local mains.
3.
Before first use, clean the appliance and accessories in accordance with the
instructions contained in section
8 Cleaning and maintenance.
4. Before assembling the appliance, make sure the food chopper has been
unplugged.
Attention!
During the initial period of use, the food chopper may give off an unpleasant
odour. This smell will fade after a fairly long period of use.
Attention! The maximum continuous operation time is 1 minute. After this
time, it is recommended that you wait 1 minute before using the appliance
again.
7.2
Installing the body on the bowl
1. Make sure the appliance is disconnected from the mains.
2. Place the glass bowl on a flat and stable surface. Make sure the blades have
been properly installed. The wider part of the blade stem should be installed
on the blade stem mounting pin.
3. Put the foodstuffs to be chopped into the glass bowl and attach the lid. Press
down.
4. Attach the food chopper body onto the lid. Make sure the motor shaft
projections engage with the upper blade stem socket.
