15
7.1
Battery installation/replacement
1 . Make sure that the scale is switched off .
2 . Remove the battery compartment cover in the direction of the below arrow on it .
3 . Remove the dead batteries (if present) .
4 . Insert 3 new AAA 1,5 V batteries as indicated by the markings in the battery
compartment .
5 . Replace the battery compartment cover .
7 OPERATION
Caution!
• The device is designed to be used with 3 x AAA 1,5 V
batteries.
• The batteries are included in the kit.
• When installing new battery, observe the polarity markings in the
battery compartment.
• Use the type of battery recommended for this device: AAA 1,5 V
.
• Do not dispose of used batteries with municipal waste. Put them into
special containers for dead batteries.
• Do not recharge batteries not designed for that purpose (non-
rechargeable batteries).
• Do not short-circuit battery terminals.
• Never expose batteries to direct heat sources such as excessive
sunlight, radiators or fire.
•
Explosion hazard! Batteries must not be dismantled, put into fire
or short-circuited.
• Always remove batteries when you do not use the device – this will prevent
damage to the device in the event that electrolyte leaks out of the batteries.
• Remove dead batteries from the device immediately.
• Electrolyte may leak out of dead batteries causing damage to the device.