EN © 2020 HOFFEN. All rights reserved.
Nail Shaper PRO 24W
20
shaping device. The speed must be matched with the drill currently in
use:
•
Up to 25 % for the largest drill with exchangeable abrasive bits.
•
From 25% to 50% - for a thick drill.
•
From 50% to 75% - for a medium-sized drill
•
From 75% to 100% - for the thinnest drill
To switch off the device, hold the main switch for approx. 3 seconds.
CHANGING THE NAIL SHAPING DRILLS
Changing the drills can only be done when the device is unplugged
from the mains.
Turning on the machine when changing drills can
cause injury to the user.
The container is located in a chamber in the bottom part of the base of
the device. To remove it, turn the base upside down and then pull the
container lock off and remove it from the chamber.
Remove the drill currently installed in the machine by gently pulling it
along the axis of the handle towards the outside of the handle. Then
insert a new drill in its place.
drill container lock
