[29]
EN
BATHROOM HEATER
• Make sure the appliance is stable and levelled and select the desired
inclination.
• Connect the plug of the appliance to a wall socket.
Operation
• To connect the appliance, pull the switch (D) and select the desired
level of heating:
Level 1 (600W) - Medium heating level: turns on one of the quartz’s
bars.
Level 2 (1200W) - High heating level: turns on the two quartz’s
bars.
• To disconnect the appliance, pull the switch (D) to “0” position.
• During normal operation of the appliance, it may verify slight vibrations.
These vibrations disappear gradually during use of the appliance
HINTS
• Keep doors and windows of the room you want to heat closed and
make sure they are well isolated, to minimize loss of heat.
TROUBLESHOOTING
• During use, if any irregularities are detected on the appliance’s operation,
check the below table to understand the causes and solutions. If it is
not possible, please contact the Customer Support Line or go to the
store where the appliance was bought.
Problem
Possible cause
Solution / Hint
The appliance does
not switch on when
connected to the wall
socket.
The plug is not
connected correctly
into the wall socket.
Connect the plug
correctly into the wall
socket.
The wall socket is
damaged.
Check if the wall
socket is damaged and
connect the appliance
to another that works
properly.