A
WOOD DOWEL M8x25MM
22
1. Insert 22 x wood dowels
(A)
into panel
(1,2,3,7,8 & 9)
. Using hammer to gently tap them in.
2. Tighten 16 x minifix bolt
(G2)
into panel
(5,7,9 & 10)
.
1. Insert 4 x shelf support
(J)
into panel
(7 & 9)
.
2. Place the drawer slide
(R1)
onto 3 holes area shown at right view panel
(1)
. Then tighten
it with 3 x cb screws M3.5x16mm
(C)
.
3. Place the drawer slide
(R1)
onto 3 holes area shown at left view panel
(3)
. Then tighten
it with 3 x cb screws M3.5x16mm
(C)
.
1. Place 12 x bracket
(P)
onto glass panels
(16)
by using 12 x screws
(C)
through bracket
(P)
thru hole.
2. Put 4 x hinges
(I)
into panels
(14 & 15)
non-thru holes by using 8 x screws
(C)
through
hinges
(I)
thru holes.
3. Insert 2 pin stopper
(M)
into panel
(10)
's non-thru holes as shown.
4. Insert 2 x magnet
(N2)
onto panel
(2)
's non-thru holes as shown, make sure the magnets,
iron side facing frontward to edging direction.
D
CB SCREW M4X20MM
DOOR SUPPORT SPRIRG
8
4
1. Insert 4 x door support spring
(K)
into door panel
(21 & 22)
top&bottom side.
2. Place 4 x handle
(L)
to panels
(14,15,21 & 22)
front. Then use 8 x screws
(D)
to tighten it
from panels
(14,15,21 & 22)
back.
3. Fix and tighten 2 x metal piece
(N1)
by using 2 x screws
(S)
to panel
(21 & 22)
back.
C
6
CB SCREW M3.5X16MM
K
HODEDAH
Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
ITEM # HIK 94-T (MOP)
KITCHEN CABINET
Product Dimensions : Height 70.9'' x Width 23.6'' x Depth 15.75''
www.Hodedah.com
1
| Page
2 people
90 mins
1 YR LTD
1 Box
HODEDAH
Questions, need parts, we are here to help!
Phone
Website
Mon - Fri | 9:30am to 5pm EST
Send us an email
Visit our website to open a case
1 - 855 - HODEDAH
1 - 855 - 463 - 3324
www. Hodedah.com
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
DO NOT RETURN PRODUCT TO THE STORE
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within
ONE YEAR
of purchase!
WARRANTY
Hodedah warrants this product to be free from defect in materials and workmanship and agrees to remedy and such defect.
This warranty covers one year from the date of original purchase. This is solely limited to replacement of defective parts and no
assembly for labor is included. This warranty does not apply to any product that has been improperly assembled, subjected to
misuse, abuse or which has been altered or repaired in any way. To obtain warranty service, original purchaser must present the
following; original bill of sale, date of purchase, where the product was purchased and images if applicable. Components replaced
warranted through the remainder of the original warranty only. The defective part will be replaced without charge, subject to the
terms and conditions described above.
WARNING
This product contains small parts, keep away from children.
This product contains plastic bags, keep away from children.
Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent this,
place heaviest items on the lower shelves and drawers. Do not set heavy object on top
shelves and drawers.
Never allow children to climb or hang on drawers, shelves and doors.
Never open more than one drawer at a time.
The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
www.Hodedah.com
2
| Page
HODEDAH
www.Hodedah.com
3
| Page
5m
Let's get started...
Helpful hints, read before beginning assembly
Make sure you receive all boxes. if your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
Work in a spacious level area, preferably carpet, near the place the unit will be used.
DO NO USE
power tools to assemble your furniture, it will strip and damage parts.
Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components.
If you are missing any hardware or parts please contact customer
service right away before assembly.
Assembly Tools Required
(not supplied)
Hammer
Philips Screwdriver
Tape Measure
No Power Tools Needed
Product Care and Maintenance
Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
Avoid placing your furniture in direct sunlight, as sunlight causes fading.
Never push, drag or pull your furniture, to move to a new location carefully with two or
more people carry the unit to its new location.
Avoid extreme changes in temperature by arranging furniture away from radiators, heat
and air vents and air conditioning units.
HODEDAH
www.Hodedah.com
4
| Page
Hardware List
A
B
QTY
22
Pcs
QTY
6
Pcs
C
QTY
56
Pcs
E
M4X38MM
F
M6X50MM
2
Pcs
8
Pcs
G1
16
Pcs
Important
1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have
everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated otherwise.
HODEDAH
www.Hodedah.com
5
| Page
Parts List
1
2
QTY
QTY
3
QTY
686x380x15mm
1
Pcs
1
Pcs
528x76x15mm
1
Pcs
4
5
6
1002x292x15mm
1
Pcs
1
Pcs
1
Pcs
HODEDAH
www.Hodedah.com
7
| Page
The Breakdown...
HODEDAH
www.Hodedah.com
8
| Page
Step 1
HODEDAH
www.Hodedah.com
10
| Page
Step 2
HODEDAH
www.Hodedah.com
11
| Page
Step 3
HODEDAH
www.Hodedah.com
12
| Page
Step 4
HODEDAH
www.Hodedah.com
Step 5
13
| Page
HODEDAH
www.Hodedah.com
26
| Page
Job Complete...
Enjoy & Thank you for purchasing from Hodedah!
D
M4X32MM
QTY
8
Pcs
G2
16
Pcs
G3
16
Pcs
H
1
Pcs
I
4
Pcs
4
Pcs
K
4
Pcs
Door
Support Spring
L
5
Pcs
M
1
Pcs
Minifix Nut
2
Pcs
2
Pcs
N1
Minifix Cap
N2
Minifix Bolt
10
11
12
1
Pcs
528x278x15mm
1
Pcs
1
Pcs
16
2
Pcs
400x176x3mm
MINIFIX BOLT
16
METAL PIECE
2
N1
E
2
CB SCREW M4X32MM
F
8
CB SCREW M4X38MM
L
1
MOON HANDLE - 96MM
2
1. Fix panel
(2)
to panel
(1 & 3)
by inserting dowels
(A)
onto non-thru holes at panel
(1 & 3).
Then tighten 2 x csk M6x50mm
(B)
to panel
(2)
from the thru-holes of panel
(1 & 3)
.
CSK CAP WOOD M6X50MM
HODEDAH
www.Hodedah.com
Step 6
14
| Page
R2
10
NAIL 5/8
2 Pin Stopper
Metal Piece
1. Place 2 x panels
(18)
next to each side of panel
(20 & 17)
.
(As Shown)
. Then tighten
screws
(F)
from the side of panels
(18)
with screwdriver.
2. Flip drawer bottom side up, take panel
(19)
and using nails
(E)
slight hammer nails
into the edges thru panel
(19)
onto panel
(20 # Drawer front)
and
(17 # Drawer back)
.
3. Then place drawer slide
(R2)
onto the edges of panels
(18)
both sides and screw in
three Letter
(C)
screws onto each hole of the drawer slide connecting it to panels
(18)
with screwdriver.
(As Shown)
.
4. Flip drawer around and attach handle
(L)
to front panel
(20)
by using 2 x screws
(E)
from the inner side panel
(20)
with screwdriver.
B
1
ALLEN KEY
H
1. Fix panels
(14 & 15)
to panels
(7 & 9)
by hinges
(I)
and tighten 8 x screws
(C)
through
hinges
(I)
thru holes.
2. Press door support spring
(K)
at panel
(21 & 22)
top & bottom side. Then insert to each
holes at panel
(4 & 2)
.
HODEDAH
www.Hodedah.com
25
| Page
Step 15
Final step...
M3.5X16MM
M8X25MM
M4X20MM
Moon
Handle 96mm
3.5kg
Magnet (1 Hole)
1002x292x15mm
2
Pcs
HODEDAH
www.Hodedah.com
Parts List
19
20
QTY
QTY
501x343x2.5mm
1
Pcs
522x192x15mm
1
Pcs
21
QTY
466x258x15mm
1
Pcs
22
QTY
1
Pcs
6
| Page
528x292x15mm
1026x277x2.5mm
G2
DRAWER SLIDE ''14
2
R1
C
CB SCREW M3.5X16MM
6
J
SHELF SUPPORT
4
3.5KG MAGNET (1 HOLE)
2
C
CB SCREW M3.5X16MM
20
I
HINGES 5/8
4
MIRROR BRACKET
12
2 PIN STOPPER
1
CB SCREW M3X12MM
2
S
2
DRAWER SLIDE ''14
FRONT VIEW
REAR VIEW
Allen Key
Hinges 5/8
J
Shelf Support
46
Pcs
O
Nail 5/8
12
Pcs
4
Pcs
P
Q
Mirror Bracket
PVC Leg
2
Pcs
R1
Drawer Slide ''14
HODEDAH
www.Hodedah.com
Hardware List
R2
S
QTY
2
Pcs
QTY
2
Pcs
M3X12MM
Important
1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have
everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated otherwise.
Drawer Slide ''14
686x380x15mm
562x396x15mm
600x396x15mm
1
Pcs
1
Pcs
2
Pcs
708x277x2.5mm
7
8
9
600x324x15mm
1
Pcs
1022x277x2.5mm
1
Pcs
13
476x274x15mm
476x274x15mm
14
15
1
Pcs
472x111x15mm
343x121x15mm
17
18
1
Pcs
466x258x15mm
7
10
11
12
13
8
9
5
6
6
2
1
3
4
14
15
16
16
17
18
19
18
20
21
22
I) Main Unit :
II) Door & Drawer :
1
7
9
2
3
8
10
5
5
7
9
BOTTOM VIEW
TOP VIEW
BOTTOM VIEW
7
9
1
3
9
| Page
C
P
16
10
M
C
I
14
2
M
N2
P
21
22
14
21
22
MOON HANDLE - 96MM
4
L
O
COMPLETED
1
3
2
4
1. Fix panel
(1 & 3)
to panel
(4)
by inserting dowels
(A)
onto non-thru at panel
(4).
Then
tighten 4 x csk M6x50mm
(B)
from the thru-holes of panel
(4)
to panel
(1 & 3)
with
allen key
(H)
.
CSK CAP WOOD M6X50MM
HODEDAH
www.Hodedah.com
Step 7
15
| Page
B
1
ALLEN KEY
H
1
3
2
4
16
1. Fix 4 x leg
(Q)
onto panel
(4)
's 4 side edges by using 16 x screws
(C)
with screwdriver
to tighten it.
CB SCREW M3.5X16MM
HODEDAH
www.Hodedah.com
Step 8
16
| Page
C
4
PVC LEG
Q
1
3
2
4
C
Q
4
1. Fix panel
(5)
to panel
(1 & 3)
by inserting dowel
(A)
onto non-thru holes at panel
(5)
.
Then insert 4 x minifix nut
(G1)
into panel
(1 & 3)
's L-thru holes and using allen key
(H)
to tighten it. After that insert 4 x cap
(G3)
.
MINIFIX NUT
HODEDAH
www.Hodedah.com
Step 9
17
| Page
G1
1
ALLEN KEY
H
3
4
1
2
5
4
MINIFIX CAP
G3
HODEDAH
www.Hodedah.com
PART 1
18
| Page
HODEDAH
www.Hodedah.com
STEP 10
19
| Page
4
MINIFIX NUT
G1
1
ALLEN KEY
H
4
MINIFIX CAP
G3
7
1. Fix panel
(8)
to panel
(7 & 9)
by inserting dowels
(A)
onto non-thru holes at panel
(7 &
9)
. Then insert 4 x minifix nut
(G1)
onto non-thru holes at panel
(8)
with allen key
(H)
.
After that, insert 4 x cap
(G3)
.
HODEDAH
www.Hodedah.com
STEP 11
20
| Page
4
MINIFIX NUT
G1
1
ALLEN KEY
H
4
MINIFIX CAP
G3
1. Fix panel
(10)
to panel
(7 & 9)
by inserting dowels
(A)
onto non-thru holes at panel
(10).
Then insert 4 x minifix nut
(G1)
into panel
(7 & 9)
's L-thru holes with allen key
(H)
to tighten it. After that insert 4 x cap
(G3)
.
10
HODEDAH
www.Hodedah.com
PART 2
21
| Page
HODEDAH
www.Hodedah.com
STEP 12
22
| Page
4
MINIFIX NUT
G1
1
ALLEN KEY
H
4
MINIFIX CAP
G3
3
1
7
9
HODEDAH
www.Hodedah.com
STEP 13
23
| Page
36
NAIL 5/8
O
1. Fix panel
(7 & 9)
to panel
(5)
by inserting dowel
(A)
onto non-thru holes at panel
(5)
.
Then insert 4 x minifix nut
(G1)
into panel
(7 & 9)
's L-thru holes with allen key
(H)
to tighten it. After that insert 4 x cap
(G3)
.
3
6
6
12
11
10
9
- At face back position, place back panel
(6,11 & 12)
onto the back of the main unit, and
align it properly for nailing. Use hammer to nail the nails
(O)
one by one on the line drawn
and at center of 4 side edges. Gap between 2 nails should be about 55mm for all.
HODEDAH
www.Hodedah.com
STEP 14
24
| Page
1. Take panel
(13)
and slide it on the 4 shelf support top as shown.
2. Then slide in the drawer
(20)
by slotting the rollers at each end of drawer slide
(R2)
onto
the rail of drawer slide
(R1)
fixed at side panel
(1 & 3)
. Then slide the drawer in slowly.
13
20
3
1
21
22
Adjust door
in & out
Adjust door
left & right
C
I
14
15
8
CB SCREW M3.5X16MM
C
REAR VIEW
A
RIGHT VIEW
LEFT VIEW
RIGHT VIEW
LEFT VIEW
RIGHT VIEW
LEFT VIEW
15
16
16
REAR VIEW
15
14
BOTTOM VIEW
15
21
22
REAR VIEW
B
H
B
H
8
9
10
7
9
5
21
22
&
K
2
21
22
&
4
7
9
HODEDAH
Installation of Anti-Tip Restraint
Kit includes:
Long screw
A
(x2)
Mounting bracket
B
(x4)
Restraint strap
C
(x2)
Short screw
D
(x2)
Serious of fatal crushing injuries can occur
from furniture tip-over. To help Prevent tip-over:
Install tip-over restraint provided
Place heaviest items in the lower drawers
Do not set TV's or other heavy objectS on top of this product
Never allow children to climb or hang on drawers, doors or
shelves
Never open more than one drawer at a time
Do not defeat or remove the drawer interlock system
Use tip-over restraints may only reduce but not eliminate the
risk of tip-over.
www.Hodedah.com
27
| Page
I
MPORTANT: Use of this safety kit is mandatory. This restraint is not a substitute for proper
adult supervision. Failure to detach this restraint before moving furniture may result in injury
and damage. If the safety kit is not in the box, please contact our consumer service team at
Tel. 1 (718) 456 0505 or Email [email protected] in order to obtain one before using
the furniture.
HODEDAH
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
Attach the mounting bracket to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
b
Screw through the smallest hole of .
d
b
www.Hodedah.com
28
| Page
BACK SIDE OF
TOP PANEL
FURNITURE
b
d
a
b
c
STEP 2:
Locate a stud in
behind the
have to
Place the other mounting
bracket on the wall
stud 2 inches below the
mounting bracket
secured to the back of
your unit.
Attach to the wall stud
using through the
smaller hole of
.
b
c
b
STEP 3:
Repeat the same step a few inches away from
the other side of the unit.
Place the furniture into position so both mounting
brackets are vertically in line.
Lace the end of the restraint strap through the
larger holes in each mounting bracket.
Secure the straps and lock into place.
b
d
a
c
Mounting bracket
4 Pcs.
TP 6#x5/8'' Screw
2 Pcs.
2 Pcs.
Restraint strap
2 Pcs.
TP 8#x2'' Screw
WALL
