Hocom SDW Series, User Manual

Page: 7 / 10

6
SDW - Weighing Scale User Manual

Under
pcs
(simple counting) mode:
!!
The suggested unit weight of the measured
subject should be heavier than the division of
this scale .
1. Put 100 pieces of the measured subject (with the
same unit weight) on the platter.
2. Press and hold [ UNIT ] key till LCD shows S= 10 ,
and then quickly (within 3 seconds) press [ UNIT ]
key again to select S=100 (10
、
20
、
50
、
100 could
be selected for the sample-quantity of the
measured subject).
3. Wait till LCD shows 100 . The scale has finish
calculating the averaging unit weight of the
measured subject. Now the simple counting
function is ready. This scale could be used as a
simple counting scale.