1-800-LOGGERS (564-4377) • 508-759-9500
www.onsetcomp.com/support/contact
© 2019 Onset Computer Corporation. All rights reserved. Onset and HOBO are registered trademarks of Onset
Computer Corporation. All other trademarks are the property of their respective companies.
23988-B MAN-WELL-CAP-02
4.
Place the disk with the sensor attached into the well cap. Route the other end of the cable through the hole on the side of the well cap
lid. When the well cap is open, use the opening in the disk (shown in step 2) to take a reference water level measurement with a water
level meter while the sensor is in position.
5.
Close the well cap. Use a padlock to restrict access to the well if desired.
Route the cable
through this hole
and up to the
station