HOBO Occupancy/Light Data Logger (UX90-005x/-006x) Manual
1-800-LOGGERS 2
www.onsetcomp.com
Specifications (continued)
Plot A: Time Accuracy
Figure A: UX90-005 Detection Area
Figure B: UX90-006 Detection Area
Logger Components and Operation
Start/Stop Button:
Press this button for 3 seconds to start or
stop logging data. This requires configuring the logger in
HOBOware with a push button start or stop (see
Setting up the
Logger
). You can also press this button for 1 second to record
an internal event (see
Recording Internal Logger Events
) or to
turn the LCD screen on if the option to turn off the LCD has
been enabled (see
Setting up the Logger
).
Battery door:
Open the battery door (not visible in the
diagram) on the top of the logger to access the logger battery
(see
Battery Information
).
Calibration Button:
Press this button to calibrate the logger for
the light you will be monitoring. See
Calibrating the Light
Sensor
for more details.
Light Sensor:
This built-in sensor monitors light on and off
conditions.
Horizontal Horizontal
X-Y Cross Section
X-Y Cross Section
Vertical
Vertical
Occupancy Sensor
Calibration Button
Start/Stop Button
USB Port
Mounting
Loop
Light Sensor
Battery Door
Mounting
Loop
LCD Screen
