Ref : MM_GENTATOO_FR Issued by : SD
Date : 10/07/2013 Up-date : 1
Page : 4/6
HOBIE TATOO
GENNAKER ASSEMBLY MANUAL
E U R O P E
Hobie Cat® Europe
Assembly manual
Hobie Cat Europe, ZI Toulon Est, BP 250, 83078 Toulon cedex 9 | T +33 (0)494 087 878 | F +33 (0)494 081 399
www. hobie-cat.net
Illustration
Etapes Description
7
Insert the white halyard in the pocket as shown on
the photograph and close it using the zip. Attach
the black halyard to the pulley that is at the end of
the white halyard using a bowline knot.
8
Hoist the gennaker by pulling the black halyard.
Once the gennaker is up, replace the black line by
the small grey and yellow line.
In order that the gennaker furls correctly, a very
hard tension must be applied on the grey and
yellow line.
9
Attach one end of this line to the shackle that is
on the top of the furler, and lead the other end
through the cleat that is at the tack point of the
gennaker. Once the tension is adjusted, stop the
line with knots on the cleat.
