13
Connect steering lines to
steering cables.
The rudder will be partially turned
in one direction. Manually twist the
rudder further in that direction until
it hits a hard stop. Next, loosen
the screw holding the appropriate
adjustment line, pull the slack out
and re-tighten.
Release the depressed caliper.
Compress the other caliper and
repeat step 3 for it.
Check the rudder function.
The rudder should twist full
in both directions when the
calipers are fully compressed.
Compress one of the two cali-
pers fully and have your partner
hold it. If working alone, use a
rubber band or tape to hold the
caliper compressed.
Note: You can put a rubber
band or tape the caliper to the
handlebar to hold it in place if
working alone.
Adjusting Steering Lines
Rudder Tuning
1
2
3
4
5
