7
MAST & SAIL ASSEMBLY
Place the top and bottom sections of the
mast end-to-end.
1
Insert the upper section of the mast
into the lower section. The end of the
upper section to be inserted has two
strips of clear tape and a notch on the
bottom. To make sure the comptip is
completely engaged, rotate the comptip
while pressing the lower section into the
extrusion until the rivet drops into the
notch.
2
Position the sail so that the bottom of the sail is at
the top of the mast.
Insert the top of the mast into the sleeve at the
foot of the sail. Gently slide the remainder of the
mast into the sail sleeve. While putting the mast
into the sail be sure that the webbing at the top is
in the saddle and the forward edge of the sail is
aligned with the forward side of the comptip
(note : the notch is located on the forward side of
the comptip).
Now that the sail is on the mast, you are ready to
put downhaul tension on the sail.
3
Top section
Bottom
section