Page 3 of 4
#84500111 H-BAR
INSTALLATION INSTRUCTIONS
Revised 10/11/11
STEP: 4
Now we know where the mounting brackets will need to be installed so we can finish the installation off. Use the remaining bolts,
washers and nuts to install the mounting brackets.
STEP: 5
The H-Bar is connected to the front mounting brackets with friction pins. These pins are for quick removal of the bar. If the H-Bar will
remain on your kayak, the front pins may be removed and replaced with the provided large bolts and nuts. This will provide a more
solid install for long term use. Be careful to not over-tighten the bolts.