B
D
A
B
C
D
www.hobiecat.com
Ref : OM_H15CLUB
Issued by : SD
Date : 12/2014
UPDATE : 1
Page : 15/27
E U R O P E
15
Hobie Cat® Europe
Assembly manual - Hobie 15 CLUB
MONTAGE DU TRAMPOLIN
1. Locate the long trampoline lacing and starting at the rear (A) by a
bowline knot, lace up the trampoline all the way to the front (B). Tension
and tie off securely.
2. Take the left lacing line for the left half and starting with a bowline
knot (C) lace all the way by pulling hard and tie off securely at point B.
Do the same thing on the right side. Start at point D.
NB : If the trampoline is loose, then retighten it. The trampoline should
always be firm. The trampoline lacings may stretch slightly after some
use so it is a good idea to check the tension regularly and re-tighten if
necessary.
CAUTION : The dolphin striker is tightened at the factory. As this part
supports the whole pressure of the mast, It is most important to verify
that it is properly tightened after some utilisations, if it is too loose, the
aluminium profile of the crossbar may not be able to resist.
